EC39 Series Oscillator

Quartz Crystal Clock Oscillators XO (SPXO) LVCMOS (CMOS) 1.8Vdc 4 Pad 3.2mm x 5.0mm Ceramic Surface Mount (SMD)

Datasheet Navigation

Electrical Specifications Dimensions and Marking Environmental / Mechanical Tape & Reel Test Circuit Solder Pad Layout Solder Reflow Show All

Resources

Series FAQs Qualification Report Thermal Resistance FAQs REACH Resources RoHS Resources

Revision G 11/02/2011

Electrical Specifications

Nominal Frequency	1.000MHz to 200.000MHz Some frequencies within this range may not be available.
Frequency Tolerance/Stability	(Inclusive of all conditions: Calibration Tolerance at 25°C, Frequency Stability over the Operating Temperature Range, Supply Voltage Change, Output Load Change, First Year Aging at 25°C, Shock, and Vibration) ±100ppm Maximum ±50ppm Maximum ±25ppm Maximum ±20ppm Maximum
Operating Temperature Range	-10°C to +70°C -40°C to +85°C
Supply Voltage (V_DD)	1.8V_DC ±5%
Input Current	3mA Maximum from 1.000MHz to 9.999999MHz 4mA Maximum from 10.000MHz to 34.999999MHz 8mA Maximum from 35.000MHz to 49.999999MHz 9mA Maximum from 50.000MHz to 69.999999MHz 11mA Maximum from 70.000MHz to 89.999999MHz 12mA Maximum from 90.000MHz to 200.000MHz
Output Voltage Logic High (V_OH)	90% of V_DD Minimum (I_OH= -4mA)
Output Voltage Logic Low (V_OL)	10% of V_DD Maximum (I_OL= +4mA)
Duty Cycle	Measured at 50% of waveform 50 ±10(%) 50 ±5(%)
Rise Time/Fall Time	Measured at 20% to 80% of waveform 6nSec Maximum from 1.000MHz to 39.999MHz 4nSec Maximum from 40.000MHz to 79.999MHz 3nSec Maximum from 80.000MHz to 200.000MHz
Load Drive Capability	15pF Maximum
Storage Temperature	-55°C to +125°C
Output Control Function	Tri-State Enable High
Tri-State Input Voltage	90% of V_DD Minimum or No Connect to Enable Output 10% of V_DD Maximum to Disable Output(High Impedance)
Standby Current	Measured with Disabled Output, High Impedance 10µA Maximum
Start Up Time	10mSec Maximum
RMS Phase Jitter	1pSec Maximum (12kHz to 20MHz offset frequency)