| |
 |
Product EOL Announcement
Ecliptek Corporation announces End of Life initiation for the ES51F3 product series
with the intent of discontinuing its availability. New orders for the ES51F3 series
will not be accepted after February 28, 2012. Please see the ES51F3 EOL Announcement.
In order to fulfill your requirements beyond this product's discontinuation, we invite you to evaluate
alternative Ecliptek products. Because this series does not have a recommended alternative, please contact
one of our Global Customer Support Executives
to assist you with finding the best Ecliptek product for your application.
|
ES51F3 Series TCXO |
Stock Search
Quote/Sample
|
- Temperature Compensated Crystal Oscillators (TCXO)
- Clipped Sinewave Output
- +5.0V Supply Voltage
- Internal Mechanical Trim Function
- External Voltage Control Option
- 14 pin DIP Metal Package
|
 |
 |
|
|
 |
Nominal Frequency |
9.600MHz to 44.736MHz |
|
The specified reference or "center" frequency of the oscillator.
Typically specified in megahertz (MHz)or kilohertz (kHz).
|
|
| Frequency Stability |
|
|
Operating Temperature Range |
per Operating Temperature Ranges vs. Frequency Stabilities table below |
|
The maximum and minimum temperatures that
the oscillator device can be exposed to during oscillation. Over this
temperature range, all of the specified device operating
parameters are guaranteed.
|
|
Supply Voltage (VDD) |
5.0VDC ±5% |
|
The DC input voltage necessary for oscillator operation, specified in
volts.
|
|
Input Current |
1.5mA Maximum from 9.600MHz to 20.000MHz
2.0mA Maximum from 20.001MHz to 29.999MHz
3.0mA Maximum from 30.000MHz to 44.736MHz
|
|
The amount of current consumption by an oscillator from the power
supply, typically specified in milliamps (mA).
|
|
| Output Voltage |
1.0Vp-p Minimum |
|
| Load Drive Capability |
10kOhms // 10pF Maximum |
|
Aging (at 25°C) |
±1ppm/year Maximum |
|
The systematic change in frequency with time due to internal changes in the crystal. Aging
is often expressed as a maximum value in parts per million per year (ppm/yr). The rate of
aging is typically greatest during the first 30 to 60 days after which time the aging rate
decreases. The following factors effect crystal aging: adsorption and desorption of
contamination on the surfaces of the quartz, stress relief of the mounting and bonding
structures, material outgassing, and seal integrity.
|
|
Storage Temperature |
-40°C to +85°C |
|
The minimum and maximum temperatures that the device can
be stored or exposed to when in a non-oscillation state. After exposing or
storing the device at the minimum or maximum temperatures for a length of
time, all of the operating specifications are guaranteed over the specified
Operating Temperature Range.
|
|
| Control Voltage (External) |
2.5VDC ±2.0VDC, Positive Transfer Characteristic.
|
|
| Frequency Deviation |
±7ppm Minimum, ±20ppm Maximum over Control Voltage (VC)
Referenced to F0 at VC=2.5VDC; VDD=5.0VDC
|
|
| Internal Trim (Top of Can) |
±3ppm Minimum |
|
| Typical Phase Noise |
-70dBc/Hz at 10Hz offset
-100dBc/Hz at 100Hz offset
-130dBc/Hz at 1kHz offset
-140dBc/Hz at 10kHz offset
-145dBc/Hz at 100kHz offset
|
|
| Input Impedance |
10kOhms Typical |
|
| Modulation Bandwidth |
10kHz Minimum measured at -3dB, VC=2.5VDC |
|
|
|
| Operating Temperature Range |
Frequency Stability
X Denotes availability from 9.600MHz to 32.768MHz.
Y Denotes availability for any valid frequency.
|
|
| ±1.5ppm |
±2.0ppm |
±3.0ppm |
±5.0ppm |
|
| 0°C to +50°C |
Y |
Y |
Y |
Y |
|
| 0°C to +70°C |
X |
Y |
Y |
Y |
|
| -20°C to +70°C |
|
X |
Y |
Y |
|
| -30°C to +75°C |
|
|
Y |
Y |
|
| -40°C to +85°C |
|
|
X |
Y |
|
|
|
 |
|
| Top of Page |
|
|
|
| Pin 1: Control Voltage or No Connect |
Pin 3: Output |
| Pin 2: Case Ground |
Pin 4: Supply Voltage |
|
|
|
|
| Top of Page |
|
|
|
Product EOL Announcement
Ecliptek Corporation announces End of Life initiation for the ES51F3 product series
with the intent of discontinuing its availability. New orders for the ES51F3 series
will not be accepted after February 28, 2012. Please see the ES51F3 EOL Announcement.
In order to fulfill your requirements beyond this product's discontinuation, we invite you to evaluate
alternative Ecliptek products. Because this series does not have a recommended alternative, please contact
one of our Global Customer Support Executives
to assist you with finding the best Ecliptek product for your application.
|
| Please note that this form is intended to provide a listing
of standard options. If you require an option or configuration
that is not present here, you may want to fill out our
Custom Oscillator Part Number Request Form. If you have any trouble with
this form, or just have a suggestion as to how it might be improved, please
contact our Global Customer Support Team. |
|
|
|
|
|
| Top of Page |
|
|
|
Product EOL Announcement
Ecliptek Corporation announces End of Life initiation for the ES51F3 product series
with the intent of discontinuing its availability. New orders for the ES51F3 series
will not be accepted after February 28, 2012. Please see the ES51F3 EOL Announcement.
In order to fulfill your requirements beyond this product's discontinuation, we invite you to evaluate
alternative Ecliptek products. Because this series does not have a recommended alternative, please contact
one of our Global Customer Support Executives
to assist you with finding the best Ecliptek product for your application.
|
|
|
|
| Top of Page |
|
|
|
|
| Line 1: |
ECLIPTEK |
|
| Line 3: |
XX.XXX M
- XX.XXX = Frequency (5 Digits Maximum + Decimal)
- M = Frequency unit of measure (MHz)
|
|
| Line 4: |
XX Y ZZ
- XX = Ecliptek Manufacturing Identifier
- Y = Last digit of Year
- ZZ = Week of Year
|
|
|
|
|
|
| Top of Page |
|
|
|
|
| Fine Leak Test: |
MIL-STD-883, Method 1014, Condition A |
|
| Gross Leak Test: |
MIL-STD-883, Method 1014, Condition C |
|
| Mechanical Shock: |
MIL-STD-202, Method 213, Condition C |
|
| Vibration: |
MIL-STD-883, Method 2007, Condition A |
|
| Solderability: |
MIL-STD-883, Method 2003 |
|
| Temperature Cycling: |
MIL-STD-883, Method 1010 |
|
| Resistance to Soldering Heat: |
MIL-STD-202, Method 210 |
|
| Resistance to Solvents: |
MIL-STD-202, Method 215 |
|
| Lead Integrity: |
MIL-STD-883, Method 2004 |
|
|
|
|
|
| Top of Page |
|
|
|
|
|
|
| Top of Page |
|
Operating Temperature Ranges vs. Frequency Stabilities
Mechanical Dimensions
Part Number Constructor / Request a Quote or Sample
Marking Specifications
Environmental & Mechanical Specifications
Other Resources